This assay has high sensitivity and excellent specificity for detection of Mini Samples Interleukin 10 (IL10).No significant cross-reactivity or interference between Mini Samples Interleukin 10 (IL10) and analogues was observed.
Matrices listed below were spiked with certain level of recombinant Mini Samples Interleukin 10 (IL10) and the recovery rates were calculated by comparing the measured value to the expected amount of Mini Samples Interleukin 10 (IL10) in samples.
Matrix | Recovery range (%) | Average(%) |
serum(n=5) | 79-105 | 94 |
EDTA plasma(n=5) | 86-103 | 93 |
heparin plasma(n=5) | 78-93 | 89 |
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mini Samples Interleukin 10 (IL10) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mini Samples Interleukin 10 (IL10) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100 Intra-Assay: CV<10%>10%>Inter-Assay: CV<12%>12%>
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mini Samples Interleukin 10 (IL10) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample | 1:2 | 1:4 | 1:8 | 1:16 |
serum(n=5) | 88-102% | 97-105% | 85-101% | 80-93% |
EDTA plasma(n=5) | 81-99% | 82-93% | 81-93% | 90-97% |
heparin plasma(n=5) | 98-105% | 80-96% | 78-94% | 87-95% |
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
1. Prepare all reagents, samples and standards;2. Add 25µL standard or sample to each well. Incubate 1 hour at 37°C;3. Aspirate and add 25µL prepared Detection Reagent A. Incubate 1 hour at 37°C;4. Aspirate and wash 3 times;5. Add 25µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;6. Aspirate and wash 5 times;7. Add 25µL Substrate Solution. Incubate 10-20 minutes at 37°C;8. Add 20µL Stop Solution. Read at 450nm immediately.
The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Mini Samples Interleukin 10 (IL10). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Mini Samples Interleukin 10 (IL10). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Mini Samples Interleukin 10 (IL10), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Mini Samples Interleukin 10 (IL10) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
ELISA / CLIA Experiment Service
Single-component Reagents of Assay KitLysis Buffer Specific for ELISA / CLIAQuality Control of ELISA / CLIADisease Model Customized ServiceTGFB1 Activation ReagentReal Time PCR Experimental Service
Catalog No. | Organism species: Mus musculus (Mouse) | Applications (RESEARCH USE ONLY!) |
EPA056Mu61 | Eukaryotic Interleukin 10 (IL10) | Positive Control; Immunogen; SDS-PAGE; WB. |
RPA056Mu01 | Recombinant Interleukin 10 (IL10) | Positive Control; Immunogen; SDS-PAGE; WB. |
RPA056Mu02 | Recombinant Interleukin 10 (IL10) | Positive Control; Immunogen; SDS-PAGE; WB. |
APA056Mu61 | Active Interleukin 10 (IL10) | Cell culture; Activity Assays. |
PAA056Mu01 | Polyclonal Antibody to Interleukin 10 (IL10) | WB; IHC; ICC; IP. |
PAA056Mu02 | Polyclonal Antibody to Interleukin 10 (IL10) | WB; IHC; ICC; IP. |
LAA056Mu71 | Biotin-Linked Polyclonal Antibody to Interleukin 10 (IL10) | WB; IHC; ICC. |
LAA056Mu81 | FITC-Linked Polyclonal Antibody to Interleukin 10 (IL10) | WB; IHC; ICC; IF. |
MAA056Mu21 | Monoclonal Antibody to Interleukin 10 (IL10) | WB; IHC; ICC; IP. |
HEA056Mu | High Sensitive ELISA Kit for Interleukin 10 (IL10) | Enzyme-linked immunosorbent assay for Antigen Detection. |
SEA056Mu | ELISA Kit for Interleukin 10 (IL10) | Enzyme-linked immunosorbent assay for Antigen Detection. |
MEA056Mu | Mini Samples ELISA Kit for Interleukin 10 (IL10) | Enzyme-linked immunosorbent assay for Antigen Detection. |
SCA056Mu | CLIA Kit for Interleukin 10 (IL10) | Chemiluminescent immunoassay for Antigen Detection. |
在20mM Tris,150mM NaCl(pH8.0)中复溶至0.1-1.0 mg / mL的浓度。不要涡旋。
避免重复冷冻/解冻循环。在2-8°C下保存一个月。分装并在-80°C下存储12个月。
热稳定性由损失率描述。损失率通过加速热降解试验确定,即将蛋白质在37°C下孵育48h,没有观察到明显的降解和沉淀。在适当的存储条件下,有效期内的丢失率小于5%。